STRUCTURAL NEUTRAL CURE SILICONE ADHESIVE SEALANT
- Ideal for two and four-sided curtain walls and architectural panel manufacturing
- Meets ASTM C920, S, NS, class 50, NT, G, A, O
- Excellent adhesion to anodized aluminum and glass
- Indoor and outdoor use
- Excellent resistance to UVs
- Low VOC
WEATHERSEAL NEUTRAL CURE SILICONE ADHESIVE SEALANT
- 304ml cartridge or 600ml sausage format
- Ideal for perimeter and movement joints
- Meets ASTM C920, S, NS, Class 50, NT, M, GA, O
- Meets AAMA 802 and 805 standards
- Can be used on aluminum, glass, masonry, some plastics, painted and unpainted metals & does not yellow
- Excellent resistance to UVs for indoor and outdoor use
- Low VOC and compatible with sealed units
- Cannot be painted
Fine tuned to provide ease of use by users and successful ultimate results, Daubert's profile wrapping system is ready for use and includes technical application support for start-ups and ongoing production.
Cooper Standard Industrial and Specialty Group’s (ISG) dual- and tri-extrusion materials create a profile with excellent compression set on the sealing side and a rigid base (slide-in or kerf mounted) that is easily inserted into a channel. Multiple-durometer profiles can be manufactured from EPDM, high-temperature silicone and plastic.
Such multiple-durometer profiles are derived from our iDea® Seal Technology. This co-polymer design features a custom or standard EPDM bulb and rigid plastic base. The result is a seal with an excellent compression set that easily slides into a channel and minimizes stretch.
High-performance coatings can also elevate seal performance. Slip coatings further improve part installation (low coefficient of friction), abrasion resistance or enhance aesthetics. In addition, coatings can offer long-term durability due to their excellent heat and freeze release properties, great weatherability and chemical resistance.
The coating process is performed in-line with the polymer extrusion, making it a cost-effective way to add value to our customers products. Cooper Standard ISG has the ability to coat an entire sheet, or a localized area, to meet your specific application performance requirements.
From standard to custom, we have the solution for you. Contact our engineers today to discuss the right design elements for your next project.
Cooper Standard Industrial and Specialty Group’s (ISG) engineering team is focused on optimizing your rubber and plastic sealing profiles from creation to execution. We couple our rubber and plastic design expertise with Finite Elements Analysis (FEA) to fully optimize products to meet tight tolerances and deliver reliable, high-performing products.
FEA technology can help predict how components will perform in real-life applications. It allows our engineers to design profiles to perform under a specific application's impact, compression, or stress. FEA analysis assists to ensure precision, performance, and efficiency in our results.
Our engineers are experienced in creating rubber and plastic sealing solutions for Storefront, Curtainwall, Entry Door, Residential Windows, Interior Wall Systems, Skylights and Garage Door Systems. Our engineers assist in everything from material selection to design performance. Below are a few featured products that we will display at GlassBuild America, booth 1713.
- Molded Corners, molded end details
- Door seals
- Die-Cut parts
- Dual Durometers
- Standard Profiles
- iDea® seal capabilities
- Wide range of materials and capabilities – Commercial and Residential
Contact our engineers today to discuss your next project. 800.683.0676
EnerEDGE® is a pre-desiccated, ready-to-apply, cellular silicone warm-edge spacer that is suitable for a wide range of insulating glass constructions in fenestration applications. EnerEDGE spacer is inset and applied to a glass lite’s perimeter to enable fabrication of dual and triple-glazed IG units in conjunction with a quality applied perimeter sealant.
Tremco Sealants and Waterproofing has provided extruded rubber products and glazing sealants to the residential and commercial markets for over 40 years. Tremco provides customers with a myriad of solutions for all types of glazing systems including, glazing tapes, glazing sealants and extruded and molded rubber products. Choose from over 20,000 different profiles in our portfolio, or let our Design Engineering team assist you in creating new profile.
Protection doesn’t stop at the glazing assembly. Preventing air and moisture infiltration at the transitions from window or curtain wall assembly to the adjacent wall assembly is critical to energy efficiency of the building and creating a comfortable environment for its occupants. Any breakdown in the assemblage could allow warm air to enter the building and condense in the wall cavity, leading to deterioration of the building envelope components and increased energy consumption and negatively impacting the indoor air quality. Tremco offers a full line of transition and sealant solutions, critical elements creating and maintaining the building envelope.
Isomelt DM15 warm melt matrix is a single-component, desiccant matrix for use with Vitro's patented Intercept® warm-edge technology and functions both as a desiccant and hot melt adhesive. Isomelt DM15 has Industry-leading drying capacity and excellent adhesion to Intercept® coil stock.
Typical Physical Properties
Base Synthetic polymers and desiccant
Colors Available Gray, Black
Form Solid material processable at elevated temperatures
Application Temperature 194-248°F(90-120°C)
Density 10.7lb/gal (1.28g/cc)
Brookfield Viscosity @ 300°F 76,000cP
Maximum Drying Capacity 14.5% by weight
Shear Strength (Al/Al, 73°F) 11psi(0.08MPa)
Ködispace® 4SG reactive thermoplastic spacer replaces the primary sealant, spacer and desiccant with a single component and is the only spacer that forms a truly cohesive, chemically bonded edge seal.
Ködispace® 4SG offers:
- Simplified and automated manufacturing process
- Improved heat stability to over 200°F (95°C)
- Increased resistance to incompatible glazing materials
- Spacer that is chemically locked into place
- Insulating glass with outstanding durability
Contact H.B. Fuller| KÖMMERLING today to learn more about this exciting technology.
Engineered to prevent any harm from coming to the IG secondary seal, NovaFlex Ultra-Low Migration High Impact Glazing Sealant develops a sure bond to most substrates and offers extremely high tensile strength to provide the longest lasting seal possible for high-impact windows.
NovaFlex Ultra-Low Migration High Impact Glazing Sealant is a non-corrosive, single-component, oxime silicone sealant and/or adhesive. A non-flowable, paste product, it presents an excellent balance between rate of cure, adhesion, and physical properties. It is designed to have ultra-low plasticizer migration into the IG secondary seal. This protects other window components from attack and degradation. This conforms to the recommendation of IG manufacturers on all Impact Window fabrication to ensure a long lasting seal. This product has been approved as part of the system to obtain Miami-Dade and HVHZ approval for glazing applications.
NovaFlex Ultra-Low Migration High Impact Glazing Sealant develops bond to most common substrates without the use of a primer. This ready-to-use, single-component compound is typically used as an adhesive to bond dissimilar materials, as a sealant for creating formed-in-place gaskets, or a multitude of other applications. It emits a lower odor than conventional acetoxy-cured silicones.