|
|
A B
C D E F
G H I J
K L M N
O P Q R S
T U V W
X Y Z
Action Bullet Resistant, Inc.
Action Bullet Resistant Inc. of West Islip, NY, is a bullet resistant
and blast resistant aluminum door and window manufacturer. We offer
a complete line of bullet resistant aluminum doors and windows that
are certified to UL 752 levels 1,3,4,5, and 8. Our products include
transaction windows with all accessories, curtain wall, sash, fixed
and operable ballistic windows, doors and much more. Our ballistic systems
have sufficient blast resistant capacity to meet GSA/ISC medium levels
of protection. Actions in house support staff will provide shop drawings
and phone support through out your project.
800/962-8088 | www.actionbullet.com
Adams Rite Manufacturing Co.
MS Maglock will be among the products that Adams Rite Manufacturing
Co. will showcase. Combining the advantages of magnetic locks with the
strength of mechanical locks, the MS Maglock utilizes a design that
triggers hardened steel mandibles to clamp the armature in a forced
entry. With mechanical mandibles engaged, the 6-by-2 3/4-by-2-inch MS
Maglock has a 4,000-pound holding force. With its small size and weight,
the lock is technician friendly, representatives say. It can be integrated
into most access-control systems. Options include a position switch
to detect attempts to open the door, and a tamper-alert sensor to verify
positive engagement of armature and magnet.
800/872-3267 | www.adamsrite.com
ADCO Products
ADCO Products will display its lines of liquid-laminating cast resins
and edge tapes, muntin-bar attachment tapes, TPS, PIB primary sealants,
polyurethane and polysulfide and 1- and 2-part silicone secondary sealants,
glazing and backbedding hot-melts and tapes, desiccant matrix, and hot-melt
sealants for single-seal and dual-seal insulating glass units. ADCO
will also show its automated machinery and hand-application tools for
high bond acrylic muntin tape, and pumping and extrusion equipment for
hot-melt edge sealants.
800/248-4010 | www.adcocorp.com
Advantage Manufacturing Corp.
Advantage Manufacturing Corporation is a US manufacturer of heavy duty
window and door hardware consisting of stainless steel four bar friction
hinges, friction adjusters, keyed limit devices, terrace door stops
and profile specific aluminum butt hinges. Our profile specific butt
hinges are CNC machined to exact tolerances to eliminate vent sag. Applications
range from residential casement products to heavy commercial terrace
doors. They are available fully assembled with an anodized finish to
match architectural colors or fully assembled and ready for paint to
match custom colors. Our high temperature bushing technology permits
cure temperatures up to 480 degrees. White bronze hardware now available.
Visit us at booth # 1839 for product demonstrations and additional information.
585/742-1570 | www.magnumhinges.com
Aegis Tools International
For over 20 years, Aegis Tools International have established themselves
as the leader in auto glass repair products and replacement tools. For
the GlassBuild America expo, Aegis Tools presents their scratch removal
systems. Scratch removal is a lucrative process emerging in the glass
industry. First, you can save considerable money removing scratches
from your inventory rather than discarding. You can also add a scratch
removal service for commercial and residential customers. Visit Aegis
at booth #535 to view demonstrations of this revolutionary system. Representatives
will be happy to discuss how scratch removal will be a worthwhile addition
to your business.
888/247-6000 | www.aegisweb.com
Allmetal, Inc.
Allmetal, Inc. is the leading producer of laser-welded air spacers in
the world. They manufacture the widest range of air spacer profiles
in the industry as well as muntin bars and other decorative components
for the insulated glass industry. Founded in 1915, the company is headquartered
in Itasca, IL, and employs over 300 people worldwide. The company has
five roll-forming and distribution facilities in the U.S. and one in
Germany. In addition, Allmetal operates its own Injection Molding Division,
Tooling & Design Division and Fabrication Machine Division, making it
the global leader for design, development, and fabrication.
800/638-2599 | www.allmetalinc.com
Aluflam North America
INTRODUCING - FIRE-RATED ALUMINUM WINDOWS AND DOORS Aluflam North America
will exhibit it's recently qualified fire-rated aluminum/glass products.
Included in the display at GlassBuild America will be a full-size door
and sidelite assembly that will showcase the clean, narrow lines of
extruded aluminum combined with the visibility of clear, laminated glass
from Vetrotech Saint-Gobain. How will it inspire you?
714/899-3990 | www.aluflam-usa.com
Aluro
HOW TO ASSEMBLE THE THERMAL BREAK (strips) ALURO is today one of the
leading international players in the assembly of the thermal break of
aluminium profiles for windows, doors, ... From the design and construction
of machinery to the assembly of the thermal break in subcontracting,
Aluro offers a full range of professional technical services to its
partners. The combination of high-tech and international experience
for years made it possible to develop the "ALUROLLER" and "B.T.M." machines,
both unique, cost-saving and very efficient. This technology is offered
today to the exigent and quality demanding aluminium industry worldwide,
to assemble the polyamide or plastic thermal break at high productivity
and low meter-cost !
+32 15 24 66 60 | www.aluro.com
Ameri-can Machinery Ltd.
AMERI-CAN Machinery Ltd. is a team of professionals combined to attain
a common goal of customer satisfaction with superior products for the
aluminum, PVC and wook market. We also pride ourselves on our after
sale service. Recognized in the window and door manufacturing community
for our integrity and ability to respond quickly to customer needs has
allowed us to grow rapidly thus becoming a major supplier for standard,
as well as, custom components. Our products range through the various
stages of Window and Door manufacturing.
877/829-5219 | www.ameri-can.ca
American Shower Door
American Shower Door has been the premier manufacturer of fine shower
doors for over 70 years. We produce a complete product menu for framed
and frameless applications using anodized aluminum, architectural brass,
and stainless steel. This provides you with a quality product at the
best price point for your customer. We also have our own hinge, hardware
and glass products for the heavy glass market including 3/8", ½" and
¾" glass. We provide standard aluminum finishes and unlimited powder
coat colors. Any custom or standard plating on brass is our specialty.
Glass options are unlimited.
800/421-2333 | www.americanshowerdoor.com
Amesbury Group
AMESBURY GROUP, is the parent company of the following Divisions: BSI-Hardware,
BSI-Balance Systems, BSI-Omega, BSI-Swing Door, Sash Controls, Fastek
Products, Foam-Tite, Plastic Profiles-PPI, and Textile. As part of the
Amesbury Group, each division ensures our customers that they have the
latest materials, technology, technical support and processing capabilities.
BSI-Hardware companies lead the world in the composition of essential
high quality window and door components, including hinges, handles,
tile latches, sash locks, multi-point lock, a variety of balances and
much more. BSI-Hardware, BSI-Balance Systems, BSI-Omega, BSI-Swing Door,
Sash Controls, Fastek Products, Foam-Tite, Plastic Profiles-PPI, and
Textile will all be represented GlassBuild America in Booth #613.
800/234-1963 | www.amesbury.com
Architectural Testing, Inc.
Architectural Testing, Inc. provides the fenestration industry with
the most comprehensive testing, computer simulation, engineering, research,
and quality assurance services. Testing services include acoustical,
components, curtain wall mock-ups (including dynamic seismic movement),
Dade County, environmental, field evaluations for structural and acoustical,
insulating glass, materials, roof, safety glazing, solar, structural,
thermal, windborne debris pressure cycling, and witnessing at manufacturers
facilities, etc. ATI provides simulation services for thermal performance
as well as engineering calculations for structural components. ATI is
approved as a Florida Quality Assurance Entity and a Validation Entity.
Certification services are provided for the Vinyl Siding Institute,
InstallationMasters window installation, decking, railing, acoustics,
and more. We conduct extensive research and development, and our professional
engineers can handle your demand! ing code or product review issues.
Visit ATI's booth #1129 for brochures and other information describing
these services.
717/764-7700 | www.archtest.com
A-TECH North America
A-TECH NORTH AMERICA is a manufacturer and supplier of machinery and
equipment for window and door makers. Our machines are used for cutting
and processing of aluminum, vinyl, wood and fiberglass frames. We also
manufacture and supply high quality double glass working machinery,
aluminum profile bending machinery for glass, windows and doors with
guaranteed full after sales service.
240/505-1967 | www.A-TechNorthAmerica.com
ATN Window & Door Corp.
ATN Window and Door Corp. is an AAMA Certified PVC Extruder. ATN has
its own compounding system; RND group (Research And Development); extrusion
tooling and fabrication tooling machine shop and our extrusion plant.
We are able to make customized extrusion for our customers. We provide
high quality PVC extrusion profiles in vinyl window and door industry.
909/989-8087 | www.atnwindows.com
ATOFINA Chemicals, Inc.
Certincoat® glass coatings technology from ATOFINA allows the production
of pyrolytic Low E coatings on flat glass used in IG units, monolithic
applications, and storm windows. Pyrolytic (hard-coat) Low E coatings
have the best combination of solar heat gain (SHGC) and U-factor to
provide optimum annual energy savings in north-central and northern
climate zones. These coatings achieve Energy Star ratings for these
northern climates and provide outstanding energy performance by allowing
the sun's free energy to enter the home during the heating season instead
of blocking it.
215/419-7443 | www.certincoat.com
Bayer Technologies
vitromatic TEIIS (automatic bending machine, warm edge compatible):
- Capacity approx. 1,400 frames, cycle time approx. 16 seconds, control:
industrial PC, Pentium CPU, TFT flat screen, any network integration
possible, computer-controlled speed, automatic feeding, spacers from
spacer magazine; endless joining process, machine adjusts automatically
to spacer width, no tools changing required
Frame filling device RFA-V50:
- Filling device for desiccant, four bent corners, filling on two sides,
filling operation through open cross sections, monitored filling time
by light barriers, short filling times, circeltime 16 seconds, standard
desiccant quality, electronic control with process monitoring and indication
of malfunction in plain language
+49/7682/8020 | www.bayer-technologies.de
Bent Glass Design, Inc.
Bent Glass Design, Inc. in Hatboro, PA provides bent, bent laminated,
and bent insulating glass products for a variety of architectural applications,
including exterior windows, doors, and skylights, as well as interior
partitions, railings, shower doors, and display cases. The company offers
decorative glasses and interlayers for expanded design, field measurement
for glass balustrades and railings, and design assistance. Visit our
website to see our full capabilities available for bending glass.
800/ 929-1198 | www.bentglassdesign.com
Billco
Billco will feature an addition to its series of application-engineered
washers. The 84-inch IG-Pro horizontal washing and drying machine is
designed for medium-to-high-volume insulating glass producers. According
to representatives, each IG-Pro Washer is built to ensure long-lasting,
continuous heavy-duty operation, is easy to maintain and is backed by
Billco's parts and service support. The IG-Pro utilizes a standard Billco
"Washer with a Brain" programmable logic control system with a touch-screen
interface that communicates in English and Spanish. More stainless steel
components have been added to the areas of the washer vulnerable to
corrosion and easy-clean water collection pans facilitate removal of
broken glass. The IG-Pro is also set up with features to process low-emissivity
glass, including a pre-spray section that removes surface contamination
before glass enters the body of the washer, sufficient heat in the wash
tank to maintain recommended water temperature, four pairs of low-emissivity
compatible brushes and plumbing in the final rinse section for de-mineralized
water.
724/452-7390 | www.billco-mfg.com
Bodycote Testing Services
Bodycote Testing Services will promote its history of delivering
applied building science services, including a full range of accredited
testing for air barriers, curtain walls, pressure equalized rainscreen
systems and windows. The company can accommodate test samples up to
a full two-story height.
905/822-4111 | www.na.bodycote-mt.com
Bohle AG
Technology - Made in Germany For the fourth time, Bohle exhibited at
the GlassBuild America. Apart from Bohle's high-quality glass processing
tools with well-known trade names like Silberschnitt and Diamantor,
the comprehensive range of UV bonding material and accessories was displayed.
Special highlights were once again the live demonstrations of UV bonding
as well as especially developed tools for thick glass and corner/ lateral
cut-outs which left many visitors amazed at what you can do with glass
when using the appropriate tools. Bohle's US distributors are C.R. Laurence
and Somaca. (The Bohle UV bonding range is only available from Somaca).
Complete technical details of the entire Bohle range of products can
be seen in the internet under www.bohle.de.
+49-2129-5568-213 | www.bohle.de
Boon Edam
Boon Edam has introduced TQ Glass. It features 3- or 4-wing versions,
inside diameters up to 8 feet, heights under canopy up to 8 feet 6 inches
and anodized, painted, stainless steel or brass finishes. TQ combines
features from the company's TQM and TQ Crystal manual revolving doors,
including a 9/16-inch laminated glass ceiling, 1/2-inch tempered glass
door wings with top and bottom rails, aluminum framed sidewalls with
1/4-inch curved tempered glass, floor-mounted speed control, genuine
horsehair weather sweeps and stainless steel or aluminum push bars.
801/261-8980 | www.boonedam.com
Bottero Flat Glass Inc.
Bottero Flat Glass Inc. will present live demonstrations of CNC, Cutting,
and Edging machines. The 4-Axis Bimatech TechnoRev 4000 model has several
patents that produce quicker set-ups and faster operation. The Antares
Model 421 is an economical 3-Axis CNC machine with full shape and linear
edging capabilities. An automatic laminated glass Cutting Table, Bottero
model Lamilinea 501A, cuts glass up to 5/16 + 0.18 + 5/16 thick with
superior edge qualities. The 352 BCS Float Glass cutting table is the
most popular cutting table in the world. The 15 Spindle Mitering Machine,
model Variant 815BCS, has integrated washing machine and back pad scrubber
options. The machine produces mitered glass pieces with brilliant polished
arrises. Bottero will also show a popular Vision Series Bevel Machine,
a Victralux Flat Edge Machine, and a Discovery Drill Machine.
845/371-6181 | www.botterofgi.com
Bromer Inc.
Bromer Inc. will highlight solutions to glass handlers' storing, handling,
transportation and machinery needs. In the booth, a Bromer rack will
be displayed on an Asplundh GMC dealership truck, with the Asplundh
dealership team and Bromer crew on hand to show attendees their patented
glass-locking system. Bromer will introduce its Glass Retriever, a system
designed to optimize the surface of each sheet of glass.
450/477-6682 | www.bromerinc.com
California Glass Association (CGA)
California Glass Association (CGA) is a trade Association, representing
the 14 Western States. We will be exhibiting our exclusive products,
"Bug-it" permanent glass etching stencils. This product is easy to use
and gives a perfect etch every time. We have expanded our capabilities
and can put graphics on the stencils now, with "Bug-it PLUS". Hands
on demonstrations will be given at Booth #1050. We will also be promoting
the Source, an interpretation of the codes and standards for safety
glazing for the 1997 UBC, the current building code for California.
If you are interested in membership please stop by and see us. CGA also
hosts the Nations second largest trade show and conference, Glass Expo
West. Attendee and exhibiting information will be available at the show
as well.
530/642-0992 | www.caglassassociation.org
Capital Tape Company Inc.
Capital Tape exhibited its complete line of products used for mirror
mounting, door and window glazing, trim attachment, bath enclosure sealing
and structural glazing. Capital Tape products are available in a range
of thickness and densities; have performance capacities from general
mounting to semi-structural, and come in a wide range of products to
suit the application requirements. Capital Tape's new VK Series foam
tapes are coated with aggressive acrylic adhesives and are designed
to meet stringent performance standards required for curtain wall structural
silicone glazing applications. VK Series foam tapes are AAMA-approved
and silicone compatible.
888/888-TAPE (8273) | www.capitaltape.com
Cardinal Shower Enclosures
Cardinal Shower Enclosures now stocks mirror frames to complement
consumers' shower enclosures. Three decorative frame sections are stocked
in eight finishes: antique, chrome, gold, marble, nickel, oil-rubbed
bronze, satin chrome and white. Available in knocked-down form or assembled,
the frames are fabricated to customers' specified dimensions. The framed
mirrors are even easier to install than hanging a mirror with J-bar
and mastic, officials claim. Simply screw the hanging bracket on the
wall and hang the mirror.
800/826-2577| www.cardinalshower.com
Casso-Solar
Casso-Solar laminating systems include a free-fall load table, two lay-up
conveyors with vacuum lift, pop-up table and pneumatic bridge, infrared
preheat oven with pre-press, infrared tack oven with three-zone convection
heating sections, tack press, acceleration conveyor and a tilt-unload
conveyor. The finely tuned infrared energy can penetrate the glasses
and heat directly the polyvinyl butyral film sandwiched between the
glasses. The convection heating capability of the system helps the tack
heating process when laminating glass coated with reflective coating
for window application, since glass with reflective coatings reflects
a certain portion of the infrared energy. With this infrared and convection
combination system, workers using the system are able to process laminated
glass with coatings at the same production rate as glass without coatings.
800/988-4455 | www.cassosolar.com
Ceradyne, Inc., Thermo Materials Division
Ceradyne's Thermo Materials Division displayed their fused silica ceramic
rolls featuring their trademarked ThermoWeld™ end caps for use in horizontal
glass tempering furnaces. Ceradyne has manufactured fused silica rolls
for more than 30 years and has recently introduced the ThermoWeld™ precision
end caps. The caps have been engineered to extremely close tolerances
resulting in precision fit end caps, which are coupled with compliant
bonding materials. This combination produces a cap that will not slip
or become loose over time. The Thermo Materials Division of Ceradyne
will be introducing this product throughout the United States over the
next 12 months.
404/292-4242 | www.ceradyne-thermo.com
Ceres Systems Corp.
Ceres Systems Corporation provides the first work flow management solution
for the flat glass industry. The application is delivered through the
internet, so you will receive instant software updates, all data is
instantly backed up, and access is from any Internet site including
the wireless WiFi sites. Each step in the process is clearly listed
and is easy-to-use. Eliminate the tracking on post-it notes, and the
manually scheduling of labor. Grow profits by tracking each function
in the process, improving the quoting cycle, increase overall capacity
with efficiency, and reducing costs by analyzing labor and material
costs.
650/948-4424 | www.ceressystems.com
CGI International, Ltd.
5/16" Pyroguard clear non-wired 20 minute fire rated glass is available
through Oldcastle Glass branches throughout the USA. Pyroguard is also
a Category I impact glass which can be used in fire doors, side lites,
transoms and borrowed lites. Pyroguard, a fire glass with excellent
optical properties, is carried in stock sheets by Oldcastle Glass and
can be cut to your required size ready for immediate delivery. Pyroguard
is an excellent product to use where both fire rating and impact safety
are required with the added advantage of immediate delivery and the
backing of a national glass fabricating company.
847/692-3500 | www.cgii.co.uk
China Luoyang Landglass Technology Co., Ltd.
China Luoyang Landglass Technology Co., Ltd. is an experienced hi-tech
enterprise specialized in researching and developing new technology,
innovative machinery and new technological process in bending and tempering
glass, and manufacturing flat/bent glass tempering furnaces, such as
LD Series A, B, C & D, and the first bi-directional glass tempering
equipment for flat/bent glass in the world. LD-D Series irregular glass
tempering furnaces can be used to produce J-shaped, U-shaped, S-shaped
and parabolic shaped glass. Wholly equipped with 26 patented technologies,
LD furnaces characterized in high quality, good performance and energy
saving, capable of tempering glass products up to standards of ANSI
Z97.1-1984 and ECE-R3. Landglass has not only sold over one hundred
glass tempering furnaces in China, but also has exported the machinery
to South Africa, Korea, Iran and Syria, acquiring good reputation in
glass deep processing field worldwide.
0086-379 3262799 | www.landglass.com
ClearShield Technologies
ClearShield Technologies will promote ClearShield MP, a replacement
for its Clearshield Plus. For shower enclosures, sandblasted glass,
residential and commercial glazing and automotive glass, ClearShield
MP provides higher resistance to attack from organic and inorganic contamination
and is easy to clean. The technology, application and price remain the
same, but a more active catalyst has been introduced to the formula.
The formula triggers an efficient chemical reaction utilizing more bonding
sites present at the molecular level of the glass surface and creating
a denser layer of protection.
708/615-8128 | www.clearshieldonline.com
Coastal Industries Inc.
Coastal Industries Inc. will highlight its limited edition series of
etched glass designs. Especially suited for vacation- or second-home
bath renovation, the etchings are original, handcrafted, themed designs,
including a marlin, seashells, art deco, palm trees, Frank Lloyd Wright
scenes and East Coast lighthouses. Coastal will also promote the availability
of a brushed nickel finish on Paragon series shower doors.
800/874-8601 | www.coastalind.com
Coral Industries
Coral Industries, manufacturer of bath enclosures, mirror closet doors
and heavy glass products, exhibited samples from our broad line of shower
enclosures, with special emphasis on our VISION Series of heavy glass
doors. Also highlighted was our new, fully frameless, 1/4" double swing
door, many distinctive patterns of 1/4" and 3/8" glass, and our custom,
heavy glass table tops. Displaying more than merely glass and metal,
these products reflected our underlying objective: To continue a 30
year legacy of providing customers with innovative designs, discriminating
styles, a diverse product line, uncompromised quality and service that
meets their needs.
800/772-7737 | www.coralind.com
Cristacurva
Its line of architectural curved glass products includes curved tempered,
curved tempered Heat Mirror laminated, curved tempered laminated and
curved tempered laminated with different graphic films. The company
will also introduce a line of curved decorative glass mainly used in
interiors.
866/229-3750 | www.cristacurva.com
C.R. Laurence Co.
C.R. Laurence Co. has introduced the GlassWedge system for easier installation
of glass hand-rail and guard-rail systems. GlassWedge is a dry mechanical
system composed of three components: a high-impact plastic isolator
channel with an inverted wedge on one channel leg; a high-strength matching
aluminum wedge; and a heavy extruded aluminum base shoe. The installer
slides the isolators on the glass panel, drops the panel into the base
shoe and drives in the wedges. GlassWedge also simplifies the replacement
of broken lites, as there are no sealants or cements to clean out. CRL
also offers an extensive line of cap railings, corners, end caps and
accessories, and hand railings, tubing, posts and component fittings
for use with structural glass railing and baluster installations. For
advocates of the wet-glaze system of installation for railings, CRL
has brought together a line of predrilled base shoes and components
with Rockite pumps, lasers, alignment fixtures and clamps.
800/421-6144 | www.crlaurence.com
DAC Products, Inc.
DAC Products is a sample and display solutions company focusing
on the window and door industry. They offer a broad product mix that
is manufactured with high quality and short lead times. Some of the
many items they produce are showroom displays, carry cases, nylon component
bags, and glass demonstration tools. Although DAC inventories many standard
items for next day shipment, they maintain a team of designers and engineers,
who are ready to help you develop custom solutions to meet your individual
needs. From your input, designers create a 3-D image of your design,
which can be e-mailed to you for viewing and approval. A prototype of
your presentation will be made before final production actually begins.
DAC then uses automated woodworking, sewing and screen printing equipment,
as well as other methods needed to produce solutions to your sample
and display needs.
800/431-1982 | www.dacproducts.com
D-CALC
The D-Calc Façade 4000 program now has a seamless interface to the
Finesse ERP solution from Enhanced Systems and Services for a complete
front- to back-end solution. The D-Calc Façade 4000 is a computer-aided
drawing program providing order entry, estimating, engineering, design,
shop and fabrication drawings, enterprise resource planning and material
requirements planning, and machine interfacing. The software was developed
for manufacturers, fabricators and dealers of windows, doors, storefronts,
curtain walls, skylights, bath enclosures and sunrooms, and similar
products.
314/725-3487 | www.dcalc.com
DecoTherm/IIMAK
DecoTherm™ is a revolutionary, patented digital technology that makes
permanent decoration of flat glass easy and affordable. DecoTherm allows
for custom, short runs of decorated glass (even just one piece) without
the problems often associated with sandblasting or etching. Images are
permanent, resist fingerprinting and can be cleaned easily. It is ideal
for commercial and residential applications and because the process
is digital, design choices are unlimited. DecoTherm™ will be offered
from leading tempering plants across North America, starting with Oldcastle
Glass in Louisville, KY and Arch Aluminum & Glass in City of Industry,
CA.
800/529-2660 | www.decotherm.net
DeNunzio, Inc.
DeNunzio is a manufacturer and distributor of framed decorative mirrors
based in Somersville Connecticut. The following are some features of
our line that make it the best selling line available. All frames are
imported hand finished hardwoods. Hand finished gold, silver and various
wood finishes, 24 standard sizes with category #2 safety backed mirrors,
or we will build any custom size your customer needs. Copper free mirrors
for longer life.1 1/4 inch bevels. All mirrors are wood backed for strength
and safety. Hangers for horizontal or vertical hanging. Liberal free
freight program.
888/222-6827 | www.denunzio.com
Designer Glass International
Designer Glass International has provided visual enhancement products
to manufactures of insulating glass since 1997. Our product lines give
the look of traditional, beveled and camed art glass without the expense,
weight and lead times associated with traditional forms. Enhance your
current products with Fashion Glass by DGI and quickly satisfy market
trends. Fashion Glass is compatible with low-e and gas filling and also
designed for modern insulating glass systems including Intercept and
Lisec / Super Spacer. Model options provide price points for new construction,
replacement and specialty markets. Use Fashion Glass in windows, transoms,
patio doors and sidelights. 614/228-1461 | www.dgiglass.com
Diamon-Fusion International
Diamond-Fusion International (DFI) of San Clemente, California licenses
their patented maintenance-reducing Nanotechnology to companies large
and small throughout the world. Glass and tile surfaces treated with
Diamon-Fusion become water repellent, stain resistant, harder to scratch
& break and allow for Invisible Art Glass. Production methods include
simple wipe/spray on applications as well as high-volume super efficient
vapor deposition in chambers. In their 7th year of business now, major
companies from around the world, including Dupont, CURVET, Cristacurva,
Cricursa and Century Shower Door have licensed DFI'S unique and patented
nanotechnology.
949/388-8000 | www.DFInanotechnology.com
Dow Corning Corporation
Dow Corning introduces Dow Corning InstantGlaze Window Assembly Sealant,
the revolutionary, hot-melt silicone that lets you make windows faster,
better and more economically. InstantGlaze is a patented, neutral-cure,
hot melt that is ideal for automated backbedding applications. InstantGlaze
is part of a total productivity solution.
989/496-4000 | www.dowcorning.com/construction
Eagle Window & Door
Eagle Window & Door offers windows and doors to fit the needs of light
commercial and high end residential projects. Our limitless colors and
expansive options give architects and builders freedom design the project
of their dreams. Visit Eagle at EagleWindow.com or call us at 800-324-5354.
800/324-5354 | www.eaglewindow.com
EAM-Mosca Corporation
EAM-Mosca offers a full line of semiautomatic, automatic and operator-less
strapping systems for industry. The company has recently configured
its renowned technology into machines designed specifically to improve
the strapping of protective packaging around windows and doors. Two
basic machine styles are offered: the ROMS is a side-seal machine for
processing products in a vertical position, while the ROMC places straps
around the sides of products that pass through it horizontally. The
systems feature DC brushless direct drives, automatic coil threading
for fast coil changes, tool-less strap guide access for cleaning, and
single-piece, fully enclosed strap track for extremely reliable strap
feeding. Machines operate at very fast cycle rates of 30 – 40 per minute
based on track size.
800/456-3420 | www.eammosca.com
Edgetech I.G. Inc.
Edgetech I.G. Inc., the leader in True-Warm® edge technology, will showcase
one of 3 fully automated Super Spacer IG lines sold to Anlin Window
Industries of Clovis, California. The line features vertical, automatic
Super Spacer application as well as automatic gas-filling and automatic
secondary sealant application. The system allows for fast, efficient
material flow with vertical-to-vertical glass handling while accommodating
all glass sizes and popular glass coatings. In fully-automated configuration,
the Super Spacer Speed Line can produce up to 1200 units per shift with
no direct labor. To date, 9 Super Spacer Speed Lines have been sold
in North America and 1 in the UK.
800/233-4383 | www.superspacer.com
EnAcSys - Beeche Systems Corp.
EnAcSys - Beeche Systems Corp. is a leading manufacturer of engineered
suspended access systems for use on bridges, buildings, and special
structures. We sell and rent equipment to contractors through a direct
sales force and select distributors. We provide engineered access solutions
to some of the most beautiful and complex projects created by the engineering
and architectural community built by world-renowned construction companies.
Our involvement on the projects displayed throughout this Website is
indicative of the breadth of our product offerings and a testament to
our engineering expertise.
518/381-6000 | www.enacsys.com
Enhanced Systems & Services Inc.
Enhanced Systems & Services Inc. will showcase the latest version of
its flagship Finesse ERP system that includes a data-import link for
fenestration software from D-Calc America. The system offers an array
of integrated, project-oriented capabilities, including project definition,
product data management, project scheduling, and labor resource planning
and scheduling, in addition to core enterprise resource planning features
such as financial and production control and supply chain management.
Finesse provides comprehensive ERP functions for engineer-to-order,
make-to-order, assemble-to-order, make-to-stock and mixed-mode environments.
The suite's sophisticated manufacturing, supply chain, financial and
customer-service modules, along with project management and engineering
capabilities, offer integration and functional depth. System modules
include estimating, quoting, contract terms and conditions, procurement,
scheduling, payroll and human resources, and production and post-production
service. Finesse also incorporates a work breakdown structure for each
project phase and task, and extensive reporting features and analysis
screens.
513/677-9441 | www.ess-finesse.com
EPCO Architectural Hardware (USA), Inc.
The EPCO team company has been selling it's brand of "EPCO Architectural
Hardware" to companies in the metal and glass industries for over 25
years. We have incorporated every aspect of hardware QUALITY that we
know into our product lines. Our products are made with only the finest
mechanical materials, along with the highest rated automatic machine
processing techniques. This supports our quest to always strive to produce
the best product. Besides our high-performance Glass Wall Spider Fittings
System, we've developed the concept of single-point view of EPCO Kolon
System, which includes Kolon Connectors, Pivoting Door(KLP), Sliding
Door(KLS) and Sliding/Stacking Door(KLF) Systems for internal partition.
Or, our toughened Sliding Door(RS 160) and Sliding/Stacking door(RS
170) Systems are both available for your options. Simply contact us
at 866-313-EPCO or e-mail to epco@epcocorp.com for more info.
626/961-3456 | www.epcocorp.com
Erdman Automation
Glazing the EACy way will be demonstrated by means of Erdman's latest
standard in Hand Assist Glazers. The Erdman Hand Assist Glazer offers
a state of the art servo control system utilizing Erdman's innovative
High Pressure Fluid Metering Technologies to provide a consistent diameter
bead of sealant to produce at speeds up to 30"/sec. The Erdman Hand
Assist Glazier sombines bead control and repeatability of an automated
system with the economy and flexibility of a manual system.
763/389-9475 | www.erdmanautomation.com
Fenetech
Fenetech will feature the FeneVision® family of software products at
this year’s show. The family of products provides a complete scalable
solution for manufacturing and distribution environments. From quotation
to invoicing, the complete integrated solution improves efficiency and
allows improvements throughout and reduced lead times without adding
additional expensive capital equipment.
330/995-2830 | www.fenetech.com
Frank Lowe Rubber & Gasket
The Frank Lowe Rubber & Gasket Co., Inc. continues to serve the needs
of the fenestration industry for over 48 years. Our product line includes:
Setting blocks in Neoprene, EPDM, PVC and Silicone; Separator pads in
Cork with Cling Foam and Foam with Cling Foam; Cork, NeoRebond, White
Polyfoam and Felt with removable adhesive; Reticulated Foam pads, bumpers,
custom window gaskets and tapes, both glazing and Muntin. We are both
a 3M distributor and converter of their industrial products division.
Integrity, prompt delivery and specialized concern for your company’s
success are what distinguish the Frank Lowe Rubber & Gasket Company,
Inc.
631/777-2707 | www.franklowe.com
Friedman Corporation
Frontier PowerBids is a software solution that enables manufacturers,
distributors and dealers do just that – simplify the selling of complex
configurable products. With the entire set of enterprise product knowledge
available at the point of sale, the net results are that your customer
enjoys a better buying experience, and your sales team maximizes revenue
opportunities for each and every sale. This interactive selling system
can prevent costly field errors that result in orders for products the
company cannot build or offer because some options cannot be combined.
It is designed to provide custom manufacturers with the tools needed
to fully integrate remote sales with overall order fulfillment and manufacturing.
847/948-7180 | www.friedmancorp.com
Functional Fenestration
Functional Fenestration offers quality hardware for doors, windows,
and skylights– with many components in architectural bronze, oil-rubbed
bronze finish, and high-grade stainless steel. FFI excels in our wide
variety of sliding and folding door systems, including top-hung and
lift-slide. New products for 2004: FFI-Eclipse e3 and e4 systems for
exterior folding doors and windows. Eclipse e4 now supports taller (13')
and heavier (265 lbs.) folding panels than any other system available.
FFI's new product for skylights, hoppers and awning windows: UCS CAT
manual chain operator, featuring compact design and an 11.5" stroke.
Also featured: UCS electric actuators for commercial/industrial applications.
323/756-9971 | www.fenestration.net
Garibaldi Glass Industries, Inc.
Since 1965, Garibaldi Glass Industries has been a leader in fabricated
glass products throughout the Pacific Northwest and beyond. Utilizing
state of the art production and manufacturing practices, Garibaldi Glass
specializes in: Insulated Thermal Glass Manufacturing, Tempered Glass
(Up to 84" x 200"), Frameless Doors & Showers, Ceramic Frit & Opaci-Coat
300 Spandrel Glass, Total Vision Showers & Entrances, Architectural
applications, Worldwide Delivery, Low-E Performance Glass, Heavy Plate,
Curtain Walls, C.A.D. and Oversize Digitizing, Reflective Coatings
604/420-4527 | www.garibaldiglass.com
GDS Storefront Estimating
GDS Storefront Estimating will be demonstrating a sneek preview of our
new v15 Storefront Estimating System. We are looking for reactions and
feedback from both customers and prospects before releasing the product
later in the year. Come by and help us make sure that our software will
remain the friendliest and most widely used storefront estimating program
in the industry.
858/538-4375 | www.storefrontestimating.com
GGF
The GGF is the recognised leading authority and voice for employers
and companies within the flat glass, glazing, window, home improvement,
plastics and film industries in the UK. The GGF membership covers all
areas from manufacturing to installation. Our involvement with all sectors
of the fenestration and glazing industry puts us in a prime position
to discuss technical standards and legislation with our partners throughout
the world. As a Federation the GGF is active in the UK, Europe and Worldwide
developing technical guidance, standards and lobbying legislators on
behalf of the industry.
00 44 845 257 7963 | www.ggf.org.uk
General Glass International Corp.
General Glass International Corp. offers single-source access to the
world of specialty glass. Our extensive inventory, available nationwide
through our network of distributors and fabricators, is the ultimate
resource for anyone who designs with glass from architects to manufacturers.
Our global contacts and suppliers, our ability to deliver promptly and
our technical know-how allow our customers to focus on what they do
best, designing, specifying, fabricating and glazing, because they know
when and where their glass is coming from. So bring us your most ambitious
designs, your most pressing deadlines, and your most challenging projects.
You'll get the glass you want, in the quantity you need, when you need
it.
201/ 553-1850 | www.generalglass.com
G.F.P.M. srl
G.F.P.M. srl, located in Schio (Northern Italy), designs, produces,
installs tables for support, loading , breaking and coupling: manual
, semiautomatic, automatic for straight cutting and shape cutting, automatic
for laminated glass cutting and separation. Besides G.F.P.M. suggests
itself as reliable partner for the execution of completely automatic
plants: complete lines composed of automatic storage for sheet stacking
and manipulation, automatic tables for loading, cutting and breaking.
The company offers on site sale and assistance. For any further information
visit our booth 3313.
+39 0445 576580 | www.gfpm.it
Glassrobots
Glassrobots ' flat tempering line RoboTemp is a new design that combines
the advantages of true convection furnaces and radiant furnaces. The
advanced design offers the following benefits to glass processors to
boost productivity and to achieve the best possible quality of production:
Multi-convection, forced convection heated oven, FuzzyTemp™ control
system, quench design optimized through computer simulation. The first
two RoboTemp™ systems are under construction, and will be presented
for customers in Glassrobots premises in Finland early April. Glassrobots
is also introducing the TFA3evolution technology for bending of difficult
windshields with sags up to 32 mm. The good quality and dimensional
accuracy of end products with high capacity are based on an enhanced
bending program with FuzzyBend control, among other innovative features.
Glassrobots, Finland is an experienced manufacturer of laminated windshield
technology (bending & de-airing), bending technology for architectural
glass, bending & tempering systems, flat tempering machines and flat
laminating lines.
+ 358 3 3132 3000 | www.glassrobots.fi
Glasstech Inc.
At the show, Glasstech Inc. will feature updated technologies added
to its proven tempering systems. Glasstech-designed systems are employed
by fabricators worldwide to produce bent and tempered components used
by builders for windows, door lites, window walls, dividers, balustrades,
furniture and decorative accents. Among Glasstech's offerings, the FCH2
gas-fired, forced-convection heater can heat low-emissivity glass at
a rate twice as fast as typical electric radiation heating systems,
dramatically improving productivity and reducing processing cost. The
ERH2-C2 electric radiant heater adds upper surface convection to improve
the productivity of Glasstech's traditional electric-radiant system,
the ERH. Glasstech's Architectural Bending and Tempering System is designed
to shape glass of varying thicknesses into graceful, custom-specified
curves. The system can bend and temper glass from thicknesses of 5-
to 19-millimeters and temper glass as large as 7 feet by 12 feet.
419/661-9500 | www.glasstech.com
G.M.C.
The main activity of G.M.C. is trading in used machinery for the flat
glass industry. For a lot of companies it is not possible to make the
heavy investments of a new machine. A solution for these companies is
buying a used machine that can be in good condition or refurbished.
For G.M.C. it is very important to find as suitable and payable solution
for these companies. When a company decide to re-organise or close down
their factory, G.M.C. is in a position to buy all kind of flat glass
machinery. One of the big strongness of G.M.C. is the huge stock of
machines. At the moment, 7 years after foundation, they have a stock
of about 200 machines. This goes from smaller machines like belt-edging
machines, till complete production lines like tempering furnaces or
double-glazing lines. A lot of the offered machines are immediately
deliverable out of stock. A second strongness of G.M.C. are their relations
with the technicians whom are specialists in flat glass machinery. This
makes that G.M.C. can offer complete refurbished machines and they can
organize the transport, installation and start-up of the machines they
are selling. Maybe G.M.C. can find a solution for your company. You
can find more information of this company on their website.
++31433566398 | www.gmc-us.com
Goral Industries Inc.
THE NEW HEAVY DUTY SAFETY WASH SYSTEM (HDSWS) Larger window sashes –
found in A-Type windows and the requirements of the new Dade County
Codes - present a problem for the homeowner. They are too heavy to support
safely during routine cleaning operations. The (SWS) and the (HDSWS)
solve the problem by automatically supporting the weight while the window
is tilted for cleaning. The HDSWS fits window sizes up to 180 u.i. With
its 315lb. tensile strength support cord the HDSWS will allow you to
handle easily those jobs that other window professionals can’t.
914/723-7020 | www.goralindustries.com
Grove Products, Inc
Grove Products, Inc is offering fireproof shims. These shims will not
burn; they are available on all stock shims by SPECIAL ORDER.
Contact us at booth #822 for details.
978/534-5188 | www.groveproductsinc.com
HAECO
HAECO introduces the new Auto-Glazeä Table, a high production automatic
glazing system that applies glazing sealant at up to 70 ft./minute to
wood, vinyl or aluminum windows. The Auto-Glaze Table is ideal for small
to large-size window manufacturers looking to increase production and
efficiency in sealant applications, whether silicone or warm-glaze.
The HAECO Auto-Glaze Table features a unique twin-selector switch that
allows the operator to unload and reload a sash while another sash is
being glazed, providing continuous production. It is engineered to deliver
accuracy and consistency and laser optics provide a red locator light
for easy positioning and placement on the glazing edge. Available in
three sizes, 36” x 48”, 48” x 78” and 72” x 96”.
800/852-3522 | www.haeco.us
Hafele America Co.
Hardware solutions for sliding glass projects. Top Hung, curved applications,
fittings for sliding/stacking glass doors along with sliding glass door
accessories. Various door configurations can be specified and weight
ranges to suit any project.
800/423-3531 | www.hafeleonline.com
Halfen Anchoring Systems
Halfen Anchoring Systems, a leader in Facade anchoring solutions, showed
its complete line of products for Curtainwall, window wall, and punched/ribbon
windows at GlassBuild 2004. Some of the featured products for Curtainwall
anchoring were: HAWR Series: Halfen anchor channel (embed)with rebar
tails, for edge-of-slab or top-of-slab applications with high loads
& thin slabs. HCW Series: Multi-adjustable curtain wall clips (anchors)
for stick, edge-of-slab applications, with up/down and in/out adjustability.
HT Series: Anchor channels (embeds) and T-head bolts with capacity range
up to 13,000 lbs. allowable load. TOSB Prototypes: Prototypes for top-of-slab
brackets with 3-dimensional adjustability were presented and were well
received by the glazing community. Production units will be available
in Fall 2004. Halfen 3-ring binders and CD's with technical information
were also offered during the show and are available by contacting Halfen.
210/658-4671 | www.halfenUSA.com
Helima Helvetion International
Helima Helvetion Intl in Booth # 2128 will be exhibiting our high quality
line of "warm-edge" Nirotec stainless steel spacer bar, aluminum spacer,
contour muntin bar, adn decorative Gold pencil bar for Insulating Glass
units. Stainless steel spacer is the only one available in all colors
including Black and White. This bendable product is approximately one-tenth
the conductivity of aluminum spacers for reduced condensation in windows
and doors. Aluminum spacer in all colors. Superb bending properties
and unmatchted tolerances for automated IG lines. Contour muntin bars
in solid and woodgrain color combinations. Milling system for the best
mitred appearance muntin intersections and rigidity in grids possible
on the market today.
800/346-6628 | www.helima.de
Inline Fiberglass Ltd.
Fiberglass windows and doors is a rapidly growing industry and becoming
a hot product on the market due to its excellent material properties.
Inline Fiberglass specializes in fiberglass window and door market,
providing superior thin wall pultrusions at competitive prices. Windows
and doors made from fiberglass have superior longevity, durability,
strength, low "U" values and virtually no expansion and contraction
compared to traditional material used in the industry. Even in the most
demanding environments Inline Fiberglass products stand out, and keep
performing year in and year out. Inline Fiberglass Ltd. is the world
leader in fiberglass pultrusions. See the glass on glass difference
at www.inlinefiberglass.com.
416/679-1171 | www.inlinefiberglass.com
J&S Machine, Inc.
J&S Machine, Inc. displayed extrusion-bending examples for the curtain
wall, storefront, and window industries. We offer NC and CNC bending
machines delivered as a turnkey solution to bending requirements. The
tooling is designed, built, and tested locally insuring a working product
before the machine arrives in the customer's facility. We can assist
in extrusion design, bending feasibility requests, and other bending
application questions.
715/273-3376 | www.jsmachine.com
Jade Hardware
Jade specializes in Glass Door fixtures for world markets. We are excited
to be introducing our products to the US. We will be show casing two
new series of shower hinges, 700S and 700S-1 series. Our 700S and 700S-1
series are the same as our popular 700 and 700-1 series in shape and
style except the size is smaller to accommodate new designs being introduced
into the market place. Our popular 700 series size is 90 x 55mm, while
700S series has been reduced to 75 x 46mm. We will also be exhibiting
our wide range of Patch Fittings, Shower Hinges, Connectors, Office
Hinges, Shower Handles, Knobs, Support Bars, and Display Hardware. Being
a manufacturer. we also can custom fabricate Hardware to customer specifications.
For further information, you may contact Todd Schlosser in Michigan.
Other country inquiries, please email or fax.
86-20-8359-1207 | 616 633-0987 | www.Jade-Hardware.com
Jiangsu Shd New Materials Co., Ltd.
The leading product of JIANGSU SHD NEW MATERIALS CO., LTD. is float
glass. The high quality plate glass adopts China advanced float technology
and equipment. The product has the fine quality such as good smooth
and no optical distortion, the float glass except directly being used
as building lighting glass and still can be directly used to make the
mirror , traffic, etc. Colors : Clear ,French Green, Ocean blue, Brown
and Grey etc. Thickness: 3mm,4mm, 5mm,6mm,8mm,10mm and 12mm. Specifications(mm*mm):
1524*2134,1650*2200,1981*3048,2134*3048,2134*3210¡ In addition, still
can process other specifications according to the need of users.
+0086-527-4212811-8864 | www.jsshd.com.cn
Key Communications Inc.
USGlass, DWM, Shelter and Window Film magazines are all publications
for their respective trade industries. USGlass magazine covers glass,
metal and glazing. DWM provides information regarding fenestration to
door and window manufacturers. Shelter magazine is geared to millwork
dealers, covering product lines related to the industry. Window Film
magazine covers the spectrum of architectural and automotive film and
laminate applications. Providing in-depth features, hard hitting articles
and expansive circulation for their readers and advertisers, these publications
are read by the leaders of their industries. For more information please
contact:
540/720-5584 | www.glass.com
LAMATEK
Lamatek specializes in custom manufactured foam gasketing products
for window and door sealing and glazing applications. High-performance
products include SDL Muntin Bar Tape and Glazing Tape along with our
complete line of jamb foams, pre-cut window and door gaskets and shims,
weather-stripping tapes, shipping pads, EPS shipping corners, setting
blocks, mulling tape, muntin bumpers, mounting tape, Protek packaging
foam, butyl (threshold) gaskets, screen foam, and glass pads. All products
exceed existing AAMA specifications where applicable.
800/526-2835 | www.lamatek.com
L. B. Plastics, Inc.
L. B. Plastics, Inc. of Mooresville, NC extrudes PVC window and door
systems for every market segment from low cost new construction (residential
and commercial) to high end, high performing units for residential and
commercial projects. Our current “off-the-shelf” systems boast performance
levels that range from Grade 35 to 80 under AAMA/NWDA 101 I.S.2-97.
In addition, we will respond to your specific requirements for custom
profiles. We will work closely with you to build a business relationship
that enhances your success and meets your service, quality and cost
goals. One plus for you is that we understand your needs. Many of our
personnel have spent years manufacturing and selling fenestration products
prior to joining our company to supply quality PVC lineals to window
and door manufacturers similar to you. Other products we offer included
our SHEERLINE decking, railing, columns, and post cladding.
800/752-7739 | www.lbplastics.com
LCS Precision Molding
LCS Precision Molding is a custom, plastic injection-molding manufacturer
with a complete line of window and door parts. LCS's expertise will
meet your demanding molding challenge with creative, affordable and
timely solutions to your plastic product requirements. LCS manufactures
plastic parts in the small to mid-size range, with a production of over
50 million parts per year. Short runs are our forte, and longer runs
we take in stride. New at LCS is (SLS) Selective Laser Sintering for
Rapid Prototyping of functional parts and certification as an ISO9000:2000
company.
507/362-8685 | www.lcsplastics.com
Lisec America Inc.
Through LISEC AMERICA INC., a subsidiary company of the LISEC INTERNATIONAL
GROUP OF COMPANIES, the World Leader will present its full range of
machinery for glass cutting, insulating glass production and flat glass
processing. All the equipment is available in different steps of automation,
perfectly tailored to the customers requirements and is completed by
adapted software. LISEC - SOLUTIONS FOR THE WORLD OF GLASS.
866/547-3226 | www.lisecamerica.com
LiteSentry
The LiteSentry 3D distortion measurement system provides on-line visual
inspection for optical distortion, thickness and area of heat-treated
glass, with 100 percent measurement in both X and Y dimensions. All
kinds of optical distortions are measured, including roll wave, pocket,
edge kink and hammer distortion. The LiteSentry 3D utilizes patented
optics, high-speed, charged-coupled device cameras and powerful algorithms
to inspect tempered and laminated glass. Benefits obtained using LiteSentry
3D include improved quality and reduced product returns. Real-time feedback
allows furnace operators to improve process control, increasing throughput.
Process control also improves load utilization from 10-to-33 percent
and labor required for inspection is decreased, while providing compliance
to standards.
507/645-2600 | www.litesentry.com
Luoyang Land Glass Technology Co., Ltd.
China Luoyang Landglass Technology Co., Ltd. is an experienced hi-tech
enterprise specialized in researching and manufacturing flat/bent glass
tempering furnace machinery such as LD Series A, B, C, & D, and
the first bi-directional glass tempering equipment for flat/bent glass
in the world, which can temper flat glass, bent glass and the glass
with special shapes with high quality. Until now, Landglass has not
only sold over one hundred glass tempering furnaces around China, but
also has exported the machinery to South Africa, Korea, Iran & Syria,
aquiring a worldwide reputation in the glass processing field.
0086-379-3262799 | www.landglass.com
LuxVu
InventQjaya and Chelix have developed a range of switchable glazing
technologies based on liquid crystal materials that transform the properties
of glass and provide more functions. The companies' most highly developed
LuxVu privacy glazing is based on polymer stabilized cholesteric texture
technology and offers switchable privacy, going from completely opaque
to transparent at the touch of a button. Other LuxVu types in development
have reflective capabilities for light and heat control. Officials report
that projected prices range from $10 to $15 per square foot.
408/735-1515 | www.chelix.com
Mainstreet Computers, Inc.
Mainstreet Computers, Inc. offers the glass industry the only truly
integrated Point-of-Sale, Inventory, and Accounting software. No matter
the size of your business, we have a system to meet your needs, whether
you have one small shop, or multiple locations. Version 7.0 as demonstrated
at the show is our newest version, SQL based and features an easier
to use format, numerous enhancements and features all requested by our
customers. Support is toll-free and unlimited with a current paid data/support
license. Contact us for more information.
800/698-6246 | www.mainstreetcomp.com
Mapes Industries
Mapes Industries has introduced impact-resistant panels to be used
in place of conventional glazing. MapeShield is targeted for use in
coastal areas where codes require high-impact glazing. These laminated
panels can be finished in architectural finishes including porcelain
on aluminum, Kynar, anodized and baked enamel. Thickness ranges from
1 inch to 4.25 inches for additional thermal efficiency. The panels'
uses include storefronts, curtain walls, window-infill and spandrel
areas. Specialty panels, such as bullet- and explosion-resistant designs
are also available.
800/228-2391 | www.mapes.com
McMullen Architectural Systems Ltd
Terrorism in Northern Ireland motivated McMullens to develop an Aluminum
Window and Curtain Walling System that had blast resistant properties.
It was intended for Commercial Office buildings where the architects
wished the building to retain its aesthetic qualities but at the same
time provide a degree of protection to the occupants and contents in
the event of an explosion nearby. The products have been used extensively
in Belfast have also been supplied to numerous British Embassies around
the world including Beirut, Kabul and Nepal. The company has successfully
undertaken testing to both the British Foreign & Commonwealth Office
and US Military Standards.
+44 28 9261 9688 | www.mcmullensystems.co.uk
Melco Steel, Inc.
As the leading American manufacturer of glass laminating autoclaves,
Melco Steel has had the benefit of working directly with a large variety
of laminators and the major manufacturers of interlayer products. Using
the knowledge gained during its 30+ years of engineering and fabrication,
Melco Steel has refined its approach to autoclaves with advanced controls
to incorporate various solutions to glass quality, strength, increased
production and reduced energy costs. We invite you to review our line
of standard production autoclaves or discuss custom solutions to your
laminating needs.
626/334-7875 | www.melcosteel.com
Meltdown Glass
Meltdown Glass will highlight its capability to produce site-specific
architectural kiln-cast glass for hospitality, corporate, commercial,
health-care, institutional, residential and liturgical projects. Specializing
in the application of colors to textured glass, the company offers a
"limitless" selection of colors and combinations of colors, opalescence
and metallic shimmers. Cast glass, created in any style, is available,
including material for room dividers, doors, windows, sidelites and
transom windows, walls, shower enclosures and countertops, in panel
sizes up to 6 feet by 12 feet. Meltdown Glass can also be tempered and
placed in insulated units.
800/845-6221 | www.meltdownglass.com
Messe Düsseldorf North America
Messe Düsseldorf North America participated in GlassBuild America 2004
in order to promote glasstec 2004, 18th International Trade Fair for
Machinery, Equipment, Applications and Products, to be held from November
9 – 13, 2004 at the fairgrounds in Düsseldorf, Germany. At the booth,
glasstec 2004 visitor and exhibitor information as well as hotel and
travel information was available.
312/781-5180 | www.mdna.com/shows/glasstec.htm
Mocap Inc.
Mocap Inc. will exhibit Protective Corner Covers, available for 2004
in metric sizes. The vinyl corner covers provide a tough, durable covering
to help protect the corners of flat glass and mirrors from chipping
and breaking during shipment, handling and storage. They also eliminate
the need for additional spacers during stacking. Stocked in sizes to
fit glass thickness of 1/16-, 1/8-, 1/4-, 3/8-, 1/2- and 3/4-inch, the
manufacturer can vary length, wall thickness and color. Custom moldings
are also available.
800/633-6775 | www.mocapglass.com
Morse Industries, Inc.
Morse Industries offers a variety of aluminum products, ranging from
glass railing, slide track and partition systems to j channel, u channel
and angles to meet both your commercial and residential project needs.
We save you time by having answers at your fingertips. Architectural
Product Specialists work with you to provide technical information and
ensure your project’s success.
800/425-7513 | www.morseindustries.com
Nordson Corporation
Nordson Corporation offers a wide range of equipment for processing
hot melt adhesives and sealants. A complete product line of melters,
extruders and dispense guns help optimize all aspects of fabricating
windows and insulated glass. Nordson will feature: BM 20 and BM 200
bulk melters for window glazing and insulated glass applications; a
DuraBlue melter/AD-41 handgun for 4th corner patching and single seal
IG; and a profile wrapping demonstration with the new VersaBlue melter
and PW200 applicator. Several active displays throughout the exhibit
hall will demonstrate the BM melters’ and VersaBlue melters’ gear metering
capabilities with reactive hot melt sealants.
800/683-2314 | www.nordson.com
Oldcastle Glass
Oldcastle Glass will exhibit StormGlass, its laminated, high-performance
product, developed to resist high design pressures for large glazed
openings in residential and commercial building markets. With an exclusive
composite interlayer, StormGlass provides architects and designers with
the flexibility of using large glass sizes while satisfying hurricane-related
building code requirements, say company officials. StormGlass features
high elastic modulus together with improved adhesion to glass. These
advantages are complemented by the fact that StormGlass is easy to process,
ensuring a reliable, consistent and on-time supply.
866/653-2278 | www.oldcastleglass.com
PPG Industries Inc.
PPG Industries Inc. has introduced its Certified Window Fabricator Program.
The service initiative, modeled after PPG's Certified Fabricator Program,
offers construction professionals access to high-quality prefabricated
windows. The first participant is Traco of Cranberry Township, PA. The
program consists of a network of 27 glass fabricators throughout North
America, who participate in training and auditing. As part of their
relationship with PPG, CWFP members provide expedited delivery of high-performance
glass products such as Solarban 60 and Solarban 80 solar-control, low-emissivity
glasses, as well as quick replacement for glass broken during or after
building construction.
800/377-5267 | www.ppgglazing.com
Pak-Line Division, Homasote Company
Pak-Line® products, including StapleSafe™ Glass Pads, are technologically
superior answers to industrial packaging and shipping for glass lites,
automobile windows and other glass products, metal coils, rolls of paper
and film, and mechanical parts. The basis of all Pak-Line Division products
is recycled, molded, environmental, and structural Homasote ® board
which provides strong, non-abrading, structural packaging for a broad
range of industries, including parts-specific custom packaging for the
automotive, appliance, converting, and heavy engine industries. Homasote
Company is known worldwide for Homasote® on which architects and engineers
have relied for 93 years.
800/257-9491 | www.pakline.com
Polytronix
Polyvision™ panels from Polytronix, Inc., a Richardson, TX based company,
are electrically switchable glass. At the flick of a switch, the panels
transform from a serene cloudy-white translucent barrier to an open,
optically clear glass. They offer both the openness of natural light
and privacy. The so-called privacy glass has a variety of applications.
Hospitals, laboratories, clean rooms, offices, presentation areas and
conference rooms with Polyvision™ panels can maintain privacy without
darkness or dull, artificial lighting. No other window treatments, such
as curtains, blinds or shades, are necessary to control light and glare.
972/2387045 | www.polytronix.com
Preference Manufacturing Pte Ltd
fresAir louvres: Rated to Australian Standards, fresAIr louvres with
polypropylene clips are available in 152mm, 130mm and 102mm range and
suits both 6mm glass/aluminium blades and 13mm timber blades. Robust
construction in the use of patented forged aluminium bearings and stainless
steel rivets and the drawn down washer ring riveting technique resulting
in sturdy operation. Finishes are standards anodized black, silver and
bronze for the frame. The moulded clips are available in black, white,
grey and brown. Special colors to match; subject to commercial viability.
The louvres system is supported by a comprehensive range of accessories.
67465185
Pres-on Tape & Gasket Corporation
Pres-on Tape & Gasket Corporation supplies a full line of products
to the window & door industry such as: Double coated glazing tapes
(polyethylene & urethane), Setting blocks (with & without adhesive),
glass separator pads for shipping (non-adhesive & removable adhesive),
cork, foam, and felt. Die cut gaskets for: sill gaskets, fin gaskets,
sash gaskets, jamb gaskets, threshold gaskets, head gaskets, and foam
tape for window wrap.
800-323-7467 | www.pres-on.com
Pro-Line Automation
Pro-Line will be demonstrating two new products at Glass Build the first
will be the new Pro-Sash line which has received many improvements from
its original configuration. This new version features multi tier welding
and cleaning/processing with an improved transportation system for moving
sashes between the welder and cleaner for faster cycle times. The second
will be the Pro-Cut AFM 2000 automatic mullion machine will also be
demonstrated this machine is capable of cutting and completely processing
mullions including cutting to length, end milling both ends and dimpling
for keeper location.
888/776-9353 | www.prolineautomation.com
R.C.N. Engineering Srl
R.C.N. Engineering Srl will introduce its Muliplo 2000 and Muliplo
2500 kilns. The kilns provide one solution to glass fusing, bending,
annealing and clear sinks.
0039 02 45101383 | www.rcnengineering.it
Record Products of America, Inc.
As exhibited at GlassBuild America booth #3039—The new Model P-137
Glass Counting Machine makes counting lites as easy as pressing a button.
The operator scans a stack and the machine promptly displays the total
count and glass thickness. This rugged lightweight battery-operated
machine can be used virtually anywhere without the need for a power
cord. It counts vertically and horizontally stacked lites. With the
optional handle, it even counts crated lites regardless of the lite
thickness. The machine will sum and display the total lites for thousands
of crates or L-bucks. For more information contact Record Products of
America:
203/248-6371 | www.recordproducts.com
RegaLead
Exhibiting for the first time, Glassbuild America marks the official
launch of RegaLead's overlay system - a quick and cost-effective way
to create decorative glass panels for applications including doors,
windows and sunrooms. Demonstrations on the stand will illustrate the
simplicity of the system and variety of stunning effects. Supplied as
a complete package, RegaLead's overlay system bonds colour, bevelled
glass and lead lines to a single piece of glass or plastic. Advantages
over traditional leaded glass include lower weight with no need for
triple glazing, greater design freedom, plus faster results and reduced
labor costs. Requiring minimal training, the system offers an excellent
added value opportunity. Established for over 25 years, RegaLead supplies
its range of technically proven products to 42 countries around the
world.
+0161 946 1164 | www.regalead.com
Retract-A-Way
Manufacture and design of retractable systems for window screens, door
screen, tub and shower enclosuers. Custom modifications for door and
window manufacturers to meet your needs. Retractable screens for single,
double, inswing and out swing doors. Vertical and horizontal window
screens for windows. Suplplier of Retract-A-Way and fivent systems to
glass and screen business, screen installers and replacement window
firms. distribution to Canada, United States of America, Mexico and
the Caribbean.
909/679-4269 | www.retract-a-way.com
Ronstan Architectural Rigging Systems
Ronstan manufactures stainless steel grade 316 cables & tie rods for
use as architectural tensioning with glazing systems. Cable & rod assemblies
are utilized as “low visual impact” structural solutions, ideal for
curtain walls, glass canopies, and skylights requiring cross-bracing
and truss support. With systems up to 1”structural tendons, Ronstan
can help realize and complement your design. Ronstan’s stainless steel
rod systems are available from 3/16” up to 1 ¼” diameter and offer “contractor-easy”
threaded assembly and installation. All rods and cable terminations
are highly polished for maximum corrosion resistance. Satin finishes
are available.
727/545-1911 | www.ronstan.com/arch
Sampson Automation Co.
Sampson Automation Co. offers computer numerically controlled machining
centers available for processing aluminum, polyvinyl chloride, light
metal and steel. The machines feature IdraCam three-dimensional programming
that converts a drawing file to a three-dimensional fabrication program.
Mechanical features include electronic clamp location that automatically
confirms the location of the clamps and assigns location to avoid contact
with the machining spindle. Models MC-7000 and MC-8000 offer options
for automatic computer numerically controlled location of the clamps.
Clamps are positioned by a drive system that operates from the machine
spindle and head for faster setup or changes in part length.
631/231-1900 | www.sampsonautomation.com
Sash Systems LLC
Sash Systems LLC. is a Joint venture of Erdman Automation Corp. and
Vertical Ventures LLC.. Sash Systems will provide semi-automated and
fully automated equipment for the new Sashlite window technology. Sash
Systems booth will feature equipment to demonstrate the Sashlite assembly
process. The Sash Systems Automated Glazer is the combination of heavy-duty
construction, innovative engineering and superior controls resulting
in the industries leading material dispensing equipment. The Sash Systems
Automated Grill Notcher combines custom capabilities and easy operation
at a fraction of the cost of other systems.
763/389-9083 | www.sashsystems.com
Schnee Morehead
Schnee Morehead introduces Cura Sil technology. Cura Sil is a platform
technology that will allow the company to manufacture adhesives and
sealants to meet its customers' requirements. The first product introduced
is the SM2100 sealant, a moisture-cure product for industrial and fenestration
details. As a fenestration product, the SM2100 can be applied as the
primary back-bedding seal to glaze windows. It exhibits fast green strength,
is paintable and stainable, adheres to all known window substrates,
and has excellent elongation and ultraviolet characteristics. It is
also available in a beaded version that provides spacing between the
glass and the glazing leg. The SM2100 can also be used as a window installation
sealant. Schnee-Morehead Inc. is also introducing its PRO Installer
Window & Door Installation System. This system includes mold-resistant
flashing tape, mold-resistant installation sealant and mold-resistant
low-pressure expanding foam.
800/878-7876 | www.schneemorehead.com
Schneider Specialized Carriers
Schneider Specialized Carriers offers a patented rolling glass rack
that allows uncrated glass up to 102-by-144 inches to be transported
in a van trailer, an enhancement from previous dimension capability
of 96-by-144 inches. Use of the Van Glass Rack system offers customers
increased trailer capacity by eliminating the need for special flat-bed
trailers; use of a van dock and forklift versus an overhead crane; elimination
of the need for tarping, as the glass is not exposed to external elements;
a portable rack system allowing for in-plant glass storage; and reduced
handling. Furthermore, van trailers can be preloaded to save time.
800/482-2737 | www.schneider.com
Securistyle Limited
As market leaders in innovative window hardware, Securistyle Limited
will feature a totally new Parallel Hinge designed for the curtain wall/Facade
market that allows window vents to be opened outward on all four corners.
The major benefits are a dramatic improvement in natural ventilation,
the ability to conceal the opening vent sightlines in the curtain walls
and when used with reflective glass no distorted images as the vent
is pushed straight out of all four corners. The vents can be manually
operated or can be motor driven and carry vents up to 220kg. Also on
display for the first time our new detachable restrictors for windows
available in 4",6",8",10" with a special key operated release mechanism.
011 44 1242 221200 | www.securistyle.com
Sertapak Group/R+W Metal
Sertapak Group & R+W Metal Inc. will be introducing the new Razor-LokTM
Glass Rack. This patent-pending new Razor-Lok clip mechanism is designed
to secure either insulated or mono glass in place during transport.
Eliminate the frustration and mess of bungee cords saving valuable labour
hours. The Razor-Lok system allows for ease of access to one or all
panels at any time and gives you the ability to load a variety of panel
sizes and thicknesses in one rack. See us in Booth #1952 to see our
revolutionary new racking system.
800/265-1162 | www.sertapak.com
SEVASA-USA
SEVASA-USA provides premium quality acid etched glass in a multitude
of choices. Solid coverage etch in 6 opacities from very light to extra
obscure, 7 different glass substrates, and 40 distinctive patterns of
etched and engraved glass. The glass is stocked in Dallas Texas and
supported by a nation-wide network of distributors who fabricate and
redistribute SEVASA products. SEVASA was established in 1983, and is
ISO 9001 and ISO 14001 certified.
800/973-8272 | www.sevasa.com
Sika Corporation
Sika offers a complete line of single part PUR sealants and adhesives
for fenestration bedding, glazing, frame assembly, and installation
applications, with multiple substrate compatibility. Specialty applications
include impact certified hybrid sealants and adhesives for use in Hurricane
and Blast Resistant window glazing and bedding applications, and high
performance non-urethane adhesives for use in window construction, and
cladding applications. Products are available in drums, unipacks and
cartridges and are suited for use in automated application equipment.
248/577-0020 | www.sika-corp.com
Sommer & Maca
Sommer & Maca featured it's VE-4+1 glass edger as well as their 7 spindle
beveller at GlassBuild America in San Diego. The compact 4+1 machine
uses 4 peripheral wheels and one cup wheel to make beautiful Flat &
Seam edges. It also can produce brilliant Waterfall and Ogee edgework
in one pass. The new vertical two-sided glass drill, the TD-2.5 with
pneumatic feed, was a real hit at the show. The TD-2.5 can process a
100" x 60" glass lite from 1/8" to 1-1/4" thick. A powered glass rack
with adjustable stops makes positioning glass easy and fast. Both glass
washers shown, the 60" Heavy Duty Tilt Top and the VEW-60 vertical model,
featured compatibility with Somaca's Aqua-Miser water treatment and
filtering equipment.
800/323-9200 | www.somaca.com
Southeastern Aluminum Products Inc.
Southeastern Aluminum Products is a manufacturer and distributor of
quality bath enclosures and mirror closet doors throughout the United
States. Based out of Jacksonville FL and with operations in Indianapolis
IN, they offer a variety of quality products and insure all customers
have adequate support for installation, through fabrication manuals,
computer software and technical representatives. The latest addition
to their Signature line is a heavy glass pivot door system using 3/8inch
glass, the cleanest and most contemporary heavy glass system in the
market. This enclosure is designed for elegance and offers a sophisticated
European look. It can be viewed at the GlassBuild America Show, Booth
1529 or for further information please logon the Southeastern Aluminum
Products website.
904/781-8200 | www.southeasternaluminum.com
Southern Stretch Forming Corporation
Now serving the US with branches in Modesto, California and Dallas,
Texas,we provide quality stretch forming. We curve metal of up to 10”
in width in such a way that distortion, changes in dimensions and wrinkling
are minimized if not avoided completely. Even some anodized metal may
be curved with minimal variation to the finish. We pride ourselves in
our quick response to quote requests, maintenance of short lead times,
and adherence to commitments.
888/308-0900 | fax: 940-484-1514
Spectratek Technologies Inc.
Spectratek Technologies will introduce metal and transparent metal polyester
films that provide a new look for the architectural market. Offered
in metal depositions conducive to getting the most visual effect possible
from each pattern and utilizing 300-gauge polyester film, Spectratek
provides this material in raw format, ready for use by members of the
glass-lamination conversion industry. The film withstands heating and
application of high-temperature adhesives. It is available in rolls
40- to 55-inches wide. The metal depositions range from clear to 65
percent light transmission, depending on the pattern. Spectratek's latest
decorative patterns offer a variety of looks, including a brushed aluminum
that appears transparent, lens array, fresnel lens and linen, with the
look of woven metal.
800/442-6567 | www.spectratek.net
St. Cloud Window, Inc.
Architectural Aluminum Window Systems For over 50 years, St. Cloud Window,
Inc., has manufactured high performance, custom aluminum windows for
all types of commercial and institutional properties. Windows are designed
for a lifetime of service to the owner and require virtually no maintenance.
SCW900 SERIES Dual window construction provides the very best in structural
integrity, air infiltration, water penetration, thermal efficiency and
acoustic performance. Available in hung, rolling and fixed configurations.
SCW900-ACOUSTIC SERIES The ultimate acoustic solution. Both operable
and fixed windows provide Sound Attenuation performance from STC 38
to 55+.
800/383-9311 | www.stcloudwindow.com
Syn-Tec
DRY VINYL BENDING
Syn-Tec is the industry leader in dry vinyl bending technology for the
window and vinyl fence manufacturers. Repeatability and symmetry are
guaranteed when you have the machine setting the diameter and changing
sizes in only 2 or 3 seconds giving you production rates up to 30 per
hour. Paybacks as short as 4 months. Profile dies are all designed and
manufactured in house. For further information, call 905-563-4661 or
905-975-9906 or e-mail sales@syn-tec.info.
905/563-4661 | www.syn-tec.info
TCME
The TCME Cooltemper convection tempering furnaces have taken both Europe
and South East Asia by storm over the last ten years. Cooltemper is
now recognised by some of Europe's leading softcoat glass manufacturers
as the "must have" furnace for reliability, speed of production & service
backup. Without doubt one of the biggest factors contributing to in
our success is the reliability of the equipment and our reaction time
when required.
00886-3-3292380 (USA) 770/371-5044 | www.tcme.com.tw
Ten Plus Architectural Products Ltd.
Providers of Architectural Aluminum Louvers to the North American
Construction Market. Competitively priced, our quality products and
an unwavering commitment to service & customer satisfaction have been
the key to our success. With over 25 years of combined experience in
this industry, we offer: design solutions / engineering & technical
assistance / costing proposals / auto-cad shop drawings / over 24 standard,
or custom profiles / a quality ‘Kynar’ painted or anodized finished
product / AMCA certified models, tested for air & water performance.
All manufactured in a 30,000 sq.ft. facility, for any size and intricate
louver project.
866/884-0717 | www.tenplus-online.com
Thermal Windows, Inc.
Thermal Windows, Inc. manufactures custom fenestration products
in Tulsa, Oklahoma. We supply windows for projects throughout America,
including condominiums, schools and universities, churches, hospitality
and extended-stay facilities, HUD projects and military housing. Our
in-house research, design and testing provides continuous quality assurance.
All testing is done by certified AAMA technicians. In addition to testing
and upgrading existing products, we continue to design new products
to meet the fenestration needs of the nation. An example is our popular
new Terrace Door, on display in GlassBuild booth #1641.
800/259-7580 | www.thermalwindows.com
Tran Fabrication Ltd.
Tran Fabrication Ltd. is a manufacturer of glass handling equipment and
custom fabrication. Located minutes outside Toronto, Ontario, we bring
to you 20 yrs of design and manufacturing expertise within the glass handling
equipment industry. We offer a full line of equipment from dollies, racks,
tables to fully automated transfer systems. Visit our booth #206.
905/804-9143 | www.tranfabrication.com
Tremco, Inc.
Since it's founding in 1928 Tremco Inc. has been the technology
leader in the construction sealants and weatherproofing industry. Tremco's
Industrial Products Division prides itself on the philosophy of providing
the customer with consistent, quality products that are competitively
priced, readily available and supported by superior customer and technical
service resources. TremGlaze residential window and door performance
sealants are specifically designed to meet the requirements of high
speed/ high volume in-plant manufacturing and field installation demands.
Its products are ideally suited for in-plant back bedding, cap, toe,
heel bead and perimeter glazing applications. Please visit us at Booth
#2501.
330/225-7420 | www.tremcoinc.com
Trimco
Trimco, a leading manufacturer of entry door hardware and trim for hotels,
restaurants, and commercial buildings, is showing samples of recent
work. Stylish new handles for glass doors and aluminum storefronts are
introduced in interesting sizes and finishes. Visit us at Booth 1323.
323/262-4191 | www.trimcobbw.com
TruSeal
Live video simulcast brings off-site insulating glass (IG) production
to TruSeal booth 3345. Visitors will view full-scale (IG) unit production
for windows on a 50” plasma screen displaying a real-time simulcast
from the Weather Shield® Windows & Doors manufacturing facility in Ladysmith,
Wis. TruSeal, a world leader in flexible spacer technology for insulating
glass, partnered with Weather Shield, one of the nation’s leading window
and door manufacturers, for this unique simulcast production. Weather
Shield employees will operate a T.A.P.E.-AT (Totally Automated Production
Equipment – Advanced Technology) IG system, designed by Besten, Inc.
and adapted for TruSeal flexible spacer. Production will include fabrication
of IG units featuring TruSeal’s DuraSeal™, a patented, flexible, warm-edge
spacer system. In addition, TruSeal will feature demonstrations of the
PURFECT GLAZE™ family of warm applied reactive urethane glazing sealants.
216/910-1532 | www.truseal.com
Truth Hardware
TRUTH HARDWARE, North America's leading designer & manufacturer of quality
operating hardware for windows, patio doors and skylights was onhand
at the GlassBuild 2004 show and drew great interest in many of their
operating and locking systems - including their new Maxim MP-Plus "automatic"
multi-point locking system for swinging patio doors, and their NEW Sentry
II motorized system for skylights and casement/awning windows. Truth
is well known for their high quality products, technical service and
exceptional leadtimes. Be sure to specify Truth Hardware on your next
window & door project. Check out our catalog online at www.truth.com.
800/866-7884 | www.truth.com
UltraGlas Inc.
UltraGlas heat-slumped glass, for all architectural applications,
can now be coordinated with specific themes, designs, textures and even
color palettes used in adjacent elements like carpeting, fabrics, window
treatments and surfaces. When used in translucent applications such
as doors, walls, windows, showers, and partitions, this glass technology
also offers privacy without restricting the transmission of light and
requires very little maintenance. Many standard texture and design choices
also exist.
800/777-2332 | www.ultraglas.com
Ultra Hardware Products, LLC.
Ultra Hardware Products, LLC., is a national manufacturer and developer
of innovative window and door hardware. Ultra's staff of design engineers
has a proven track record of innovation in the field of sash lock design,
casement hardware and quality manufacturing. Ultra will also make your
supply chain more efficient with SKU reductions, rapid response shipping
and stocked quantities for blanket orders. Ultra's proven 1-stop-shop
approach will guide you through design, testing, production and delivery.
Take a closer look at Ultra Hardware and discover the difference that
innovation and personal attention can make on your bottom line.
856/663-5050 | www.ultrahardware.com
Universal Photonics
Universal Photonics offers a one-stop shop for window/mirror production
consumables. We presented cerium oxides, coolants, and polishing wheels
at the Glassbuild Show. Dri-Kool coolant is 100% synthetic coolant in
a concentrated powder form. This coolant works as well as liquid and
offers better transportability and storage. Our LP Unalon wheels replaces
standard felt and synthetic felt position wheels and provides greater
durability and finish when used with cerium oxide. Our latest innovation
is the Victory II flat edge cerium-filled polishing wheel that polishes
with water only. This patented wheel provides a superior clean finish
and is extremely long lasting.
516/935-4000 | www.universalphotonics.com
Urban Machinery
Urban Machinery will be demonstrating quality-built machinery for
the efficient production of PVC windows and patio doors including sawing,
four point welding, CNC corner cleaning and material handling equipment.
Featured will be the single head SV-530 CNC Corner Cleaner which utilizes
high speed, precision tool movements to completely clean the inside
and outside areas of any frame or sash. While the machine will be configured
in San Diego as a standalone unit, the SV-530 can also be equipped with
automated frame and sash rotation or integrated with any of our automatic-offloading
welding lines.
519/624-0080 | www.u-r-b-a-n.com
USK Glass
USK Glass partners with SoftSolution GmbH in Austria to bring affordable
solutions to problems within the glass industry by joining innovative
software programming with current technology. An example of their work
is Virtual Digitizing software, allowing companies to process templates
without large and expensive digitizing tables, as well as providing
a tool to create accurate dimensions on site and replacing the need
to make templates. From a digital photograph, users digitize and produce
a CAD file from templates, openings on site, broken or replacement windows,
and even vinyl window frames. Installation and training takes one day.
352/567-7711 | www.uskglass.com
Uvekol
A site for glassmakers, architects and designers has been launched by
Surface Specialties UCB. The site is designed to give an insight into
the latest developments in and the benefits of ultraviolet-curing technology
in today's laminated glass industry. The site includes technical information,
test data and video demonstrations of the benefits of Uvekol laminated
glass and a series of case studies illustrating specific glazing projects.
888/269-3901 | www.ucb-group.com
Vetrotech
Vetrotech Saint-Gobain introduces the SGG Swissflam Structure, a butt-joint
60-minute fire-rated system that eliminates vertical mullions. Recommended
for use as partition walls in offices, shopping centers, schools, airports
and in other locations where maximum visibility is desired, while at
the same time complying with fire and building code requirements. The
Swissflam system is available with H-profile gaskets or silicone joints.
Large lites of SGG Swissflam-60 create a glass wall that meets applicable
fire codes.
888/803-9533 | www.vetrotechUSA.com
Vinyl Doctor
Introducing color matched “Liquid PVC,” patented for use on window frames
to resolve issues like repairing imperfect miter joints; weather-sealing
connections or even restoring damaged extrusions. ‘Cool-Coat’ is their
advanced waterborne PVC paint containing heat-reflective pigments. It
retains flexibility while preserving a hard, scratch resistant surface.
The flange extension is a 6-inch membrane that welds to the window frame
to creates the most permanent weather barrier available. This family
business has found a formula that works and makes booth #246 a worthwhile
stop.
503/249-0737 | www.vinyl-doctor.com
Wakefield
Wakefield will showcase its insulating glass dollies and harp racks.
For storing and moving random sizes of insulating glass, the IG dollies
feature easy loading with either wood or polyvinyl chloride flip-up
fingers. The all-welded steel construction has a base with productive
bottom strips and a pull handle on the frame. Wakefield harp racks are
ideal for separating and transporting single lites of glass, representatives
say. The high-density polyethylene grooved base makes loading easy,
while polyvinyl chloride-covered divider rods separate and protect the
glass. The racks are available in a variety of sizes.
216/464-9455 | www.wakefieldequip.com
Walker Glass Company
Textures acid-etch glass and mirror products were featured by Walker
Glass Company. Based in Montreal in its 225,000 ft facilities, Walker
offers all the benefits of domestic manufacturing; immediate deliveries;
stoce or cased product; sizes up to 96 x 144; thicknesses up to 3/4";
full-load or LTL deliveries; available in clear, low-iron, or tinted
float... Textures is offered in two finishes, (satin and opaque) in
both single and two-sided etching.
888/320-3030 | www.walkerglass.com
Wausau Window and Wall Systems
In their freshly designed tradeshow booth, Wausau Window and Wall Systems
displayed: The newly introduced flexible and competitive RX Series window
wall, Advantage Wausau's high-quality windows with high-speed delivery,
Unitized curtainwall with integrated sunshades as featured on the Omni
San Diego Hotel. Also in California, Wausau's contributions can be seen:
On San Francisco's Moscone West Convention Center's three-story, luminescent
lobby, On Sacramento's Capitol Area East End Complex - the largest and
the "greenest" government building by the State, With Berkeley's Lawrence
Berkeley National Laboratory studying the commercial building applications
for electrochromic window systems.
877/ 678-2983 | www.wausauwindow.com
Werner Systems
Wermer Systems design and development staff has accrued substantial
experience worldwide in the design, engineering and fabrication of aluminum
glazing systems and building envelope solutions. For almost two decades
Werner Systems has created products of the highest quality that have
met the most demanding structural, seismic and thermal performance standards.
In addition to many standard glazing systems available, Werner Systems
offers Design Build services utilizing custom designed glazing systems.
Werner’s in-house engineering staff integrates both 2D and 3D CAD and
Isometrics to assist the Architect and Glazing Contractor visualize
the end product proposed for each project.
714/731-9999 | www.wernerengineering.com
Wikk Industries Inc.
Wikk Industries Inc. is showcasing their Balanced Door Systems, which
they have been designing and manufacturing since 1980. These doors,
frames, and their balance hardware - under the brand name Excel - are
customized to your project specifications. Three full sized, operational
doors are featured at the Wikk booth; an all-glass, a formed and one
clad. Excel Balanced Door Systems operate as manual or automatic units,
the latter using Wikk's signature overhead concealed automatic operator,
named the Access-A-Matic. Two of the booth's doors utilize this unique
operator, the only one of its kind in the balanced door industry. Also
on display will be various products from their AccessAbility™ line of
automatic door controls. You'll see standard and custom switches with
their corresponding mounts along with bollard posts and the Ingress'r,
the latest innovation for handicapped access.
877/421-9490 | www.wikk.com
Window Technology Systems, LLC
Window Technology Systems, LLC WTS Paradigm is an engineering-accurate
software solution that was designed exclusively for the window and door
industry. Optional modules include production scheduling, inventory
management, business analytics, customer service, and more. WTS Paradigm
is leading-edge configurator software designed by window engineers and
software experts. Visit us at booth #1836 for software demonstrations
and to speak with our representatives. 403/663.9819 CANADA 715/748.5768
USA | www.windowengineering.com
Wood's Powr-Grip Company Inc.
From factory floor to final installation, Wood's Powr-Grip offers a
full line of vacuum hand cups, multi-purpose and production line below-the-hook
lifters and other products designed specifically for glass handling.
Featured at GlassBuild was our newest products, the Manual Rotator Tilter
with Remote Control and two new lifters featuring Powr-Grip's Quadra-Tilt
design. Also on display was our full line of vacuum cups. Powr-Grip
offers a variety of styles in pad diameters from 3 to 10 inches for
handling flat, curved, autoglass and pattern glass. For more information
on these or other Powr-Grip products, contact:
800/548-7341 | www.powrgrip.com
XYG Glass
XYG Glass will exhibit solar reflective laminated glass and specialty
insulating glass. Other products include thick laminated glass with
090 polyvinyl butyral, flat and curved tempered and laminated glass
with ceramic frit designed for shower doors, glass railings, glass furniture,
skyline and solarium.
604/273-0813 | www.xinyiglass.com
|
|
